Greeves

Greeves logo Motorcycles Ltd

Parts

Click on the words to see description of the items
Ancillary Parts	Bearings	Brake Plates and Shoes	Cables	Carburettors
Chains	Clothing	Covers, Inner/Outer	Cranks/Crankcase	Electronic Ignition
Engines, New	Exhausts	Footrests	Forks	Framekit
Gaskets	Gearbox	Handlebars	Head and Barrel	Kick Starts, Folding
Lighting	Leading Link Bushes	Mudguards	Nuts and Bolts	Pistons
Seats	Shocks	Stands	Tanks	Tools
Tubes/rim tapes	Tyres	Wheels and Hubs

For any items not shown on the website please contact us and we will try our best to supply it for you.

Wheels and Hubs

Our hubs have been cast and machined in the same manner as our barrels and other parts. The hub pattern was taken from an original Griffon hub. We have found a way of holding the liner in the hub - the liner is cast in at production stage not shrunk in afterwards. The hub is then machined up to suit the brake plate with about 0.5mm tolerance with brake shoe, so a little adjustment can be made. The liner is a special spun material that will not polish when the brakes are applied. In tests we have carried out our brakes/brake shoe combination are probably the best there is for a 6" single shoe braking system. The hub should be used with our brake plate and shoes as this combination works perfectly.

Back to Parts menu

Created on ... Feb 20th, 2002 by Terry Joyce